Looking for a reliable motorcycle antifreeze coolant? DYNAMAX Motoforce Coolant -37°C is a high-quality fluorescent yellow ready-to-use motorcycle coolant (1 litre) based on ethylene glycol with corrosion inhibitors. It meets ASTM D3306/D4656, BS 6580 and SAE J1034, gives very good heat transfer and protects light-alloy bike engines against frost and corrosion all year round. It protects the engine cooling system against freezing, overheating, corrosion and deposits all year round.
Watch: DYNAMAX motorcycle antifreeze coolant in 44 seconds
See the key benefits, ready-to-use advantages, approvals and how to top up in this short product video.
Why does coolant matter?
Engine coolant (antifreeze) stops the water in the cooling system freezing in winter, raises its boiling point in summer and carries corrosion inhibitors that protect the radiator, water pump, head gasket and aluminium parts. The inhibitors wear out over time, so coolant should be changed at the interval in your service schedule and always topped up with the type your bike specifies.
Motorcycle antifreeze coolant – key benefits
- Ready to use to -37°C – no measuring or mixing
- Approvals: ASTM D3306, ASTM D4656, BS 6580, SAE J1034
- Corrosion protection for aluminium and other metals; does not damage rubber
- Protects against overheating and helps prevent deposits
- Very good heat transfer
- Fluorescent yellow – easy to see the level and spot leaks
- Made in Slovakia (EU) by DYNAMAX
Motorcycle antifreeze coolant – ready mixed, just pour
DYNAMAX Motoforce motorcycle coolant is pre-diluted to protect down to -37°C (±1°C), so there is no measuring, no mixing errors and no tap-water scale. Pour it straight into the expansion tank.
Which bikes is this motorcycle antifreeze coolant for?
Suitable for motorcycles, scooters, ATVs and quads with liquid-cooled engines, especially light aluminium alloy engines. Miscible with coolants based on mono-ethylene glycol and propylene glycol. Always check the coolant specification in your owner handbook or on the expansion tank. See also DYNAMAX Motoforce 4T 10W40 motorcycle engine oil and DYNAMAX Syntech 2T motorcycle engine oil.
How to use motorcycle antifreeze coolant
- Let the engine cool completely – never open a hot cooling system, it is under pressure.
- Check that the coolant matches the specification in your handbook.
- Pour it in undiluted – it is ready to use.
- Fill the expansion tank between MIN and MAX, close the cap, run the engine and re-check the level once it has cooled.
Safety
According to the DYNAMAX safety data sheet this coolant is labelled Warning: harmful if swallowed (H302) and may cause damage to organs through prolonged or repeated exposure (H373). It contains ethylene glycol. Do not breathe vapours and do not eat, drink or smoke when using it. Always keep it out of reach of children and pets, wash your hands after use and rinse any spills off paintwork with water. Dispose of old coolant at a recycling centre – never down the drain.
Motorcycle antifreeze coolant specifications
| Brand | DYNAMAX |
|---|---|
| Product | Motoforce Coolant -37°C |
| Type | ready mixed (-37°C) |
| Volume | 1 litre |
| Approvals / standard | ASTM D3306, ASTM D4656, BS 6580, SAE J1034 |
| Base | ethylene glycol with corrosion inhibitors |
| Colour | Fluorescent yellow |
| Hazard classification | Warning – H302, H373 (see SDS) |
| Made in | Slovakia (EU) |
| MPN | 501976 |
| EAN | 8586016015679 |
Manufacturer information
DYNAMAX Motoforce Coolant -37°C is made in Slovakia by DYNAMAX, an award-winning Slovak brand of oils and technical liquids. See the DYNAMAX technical liquids range on the manufacturer’s website.
Motorcycle antifreeze coolant – frequently asked questions
Do I need to add water?
No. It is ready mixed and protects to -37°C straight from the bottle. Adding water would reduce the frost protection.
Can I use it for a full coolant change?
Yes. Drain or flush the old coolant and refill with the ready mixed coolant. Check your system capacity – most cars need several litres.
Which coolant does my motorcycle need?
Use the type your bike manufacturer specifies. DYNAMAX Motoforce coolant is made for light aluminium alloy bike engines and meets ASTM D3306/D4656, BS 6580 and SAE J1034.
Is it suitable for scooters and ATVs?
Yes. It is used in the cooling systems of motorcycles, scooters, ATVs and quads.
Does the colour matter?
Colour alone does not identify the coolant type – always match the specification (for example VW TL 774) in your handbook.
How often should coolant be changed?
Follow your vehicle service schedule. The corrosion inhibitors wear out over time, so coolant needs changing periodically even if the level is fine.
Is it harmful?
Yes. The safety data sheet classifies it as harmful if swallowed and able to damage organs through prolonged or repeated exposure. Keep it away from children and pets and rinse spills with water.
























Reviews
There are no reviews yet.