DYNAMAX DOT 5.1 Brake Fluid is a 500 ml high-performance glycol-based brake fluid with a boiling point above 260°C. It was developed for the hydraulic brake and clutch systems of state-of-the-art vehicles and highly loaded racing cars, as well as ABS, EDS and ESP systems. It has good thermal stability, protects ferrous and non-ferrous metals against corrosion and does not harm rubber seals or metal parts.
Watch: DYNAMAX DOT 5.1 brake fluid in 50 seconds
See the boiling point, technical data, compatibility and how to top up safely in this short product video.
Why choose DOT 5.1?
DOT 5.1 is the highest glycol-based brake fluid class. Its higher boiling point gives extra margin against brake fade when brakes get very hot – on mountain roads, when towing, on track days or in racing. Like all glycol fluids it absorbs moisture over time, so change it on schedule (most manufacturers recommend about every 2 years, track cars more often). Do not confuse DOT 5.1 with silicone-based DOT 5, which is a different fluid.
Key benefits
- DOT 5.1 to FMVSS 116, also meets ISO 4925 Class 3/4/5.1 and SAE J1703/J1704
- Boiling point above 260°C for resistance to brake fade under high loads
- For brakes and clutches – hydraulic brake and clutch systems
- ABS, EDS and ESP systems in modern cars
- Performance cars, motorcycles and racing
- Corrosion protection for ferrous and non-ferrous metals; safe for rubber seals
- Made in Slovakia (EU) by DYNAMAX
Compatibility
Miscible with glycol-based DOT 3, DOT 4 and DOT 5.1 brake fluids that meet ISO 4925, SAE J1703 or FMVSS 116. Do not mix with silicone DOT 5 fluid or mineral (LHM) fluid. Always use the fluid type shown in your vehicle handbook or on the reservoir cap. For everyday cars see DYNAMAX DOT 4 and DYNAMAX DOT 4 ESP.
How to top up
- Check that your vehicle or motorcycle uses DOT 5.1 or DOT 4 glycol-based fluid.
- Wipe the reservoir cap clean before opening so no dirt falls in.
- Fill undiluted, between the MIN and MAX marks.
- Close the reservoir and the bottle tightly straight away – brake fluid absorbs moisture.
Safety
According to the DYNAMAX safety data sheet, this mixture is not classified as dangerous under CLP (Regulation (EC) No 1272/2008). Keep out of reach of children, avoid contact with eyes and wash your hands after use. Brake fluid damages paintwork – rinse any spills with water immediately. A falling fluid level can mean worn pads or a leak; if unsure, have the brakes checked by a garage.
Specifications
| Brand | DYNAMAX |
|---|---|
| Product | DYNAMAX 265 DOT 5.1 brake fluid |
| Volume | 500 ml |
| Standard | FMVSS 116 DOT 5.1 |
| Also meets | ISO 4925 Class 3/4/5.1, SAE J1703/J1704 |
| Boiling point | above 260°C |
| Systems | hydraulic brakes and clutches, ABS, EDS, ESP |
| Density at 20°C | 1,060 – 1,070 kg/m³ |
| pH | 7 – 11.5 |
| Colour | clear with a yellow-brown tint |
| Hazard classification | not classified as dangerous (CLP) |
| Weight | 580 g |
| Made in | Slovakia (EU) |
| MPN | 502050 |
| EAN | 8586016015266 |
Manufacturer information
DYNAMAX 265 DOT 5.1 brake fluid is made in Slovakia by DYNAMAX. See the DYNAMAX DOT 5.1 brake fluid page on the manufacturer’s website, including the technical and safety data sheets.
Frequently asked questions
What is DOT 5.1 brake fluid?
DOT 5.1 is a high-performance glycol-based brake fluid (FMVSS 116) with a higher boiling point than DOT 4. DYNAMAX DOT 5.1 has a boiling point above 260°C.
Can I use DOT 5.1 instead of DOT 4?
DOT 5.1 is glycol-based and miscible with DOT 3 and DOT 4, and is commonly used as an upgrade where DOT 4 is specified. Always check your vehicle handbook first.
Is DOT 5.1 the same as DOT 5?
No. DOT 5 is silicone-based and must not be mixed with glycol fluids. DOT 5.1 is glycol-based like DOT 3 and DOT 4.
Is it suitable for motorcycles?
Yes, for motorcycles whose brake or clutch reservoir specifies DOT 5.1 (or DOT 4). Check the reservoir cap or handbook.
Can it be used in a hydraulic clutch?
Yes. DYNAMAX DOT 5.1 is developed for hydraulic brake and clutch systems.
How often should I change it?
Most manufacturers recommend about every 2 years; track and racing cars often change it more frequently because of high brake temperatures.
Is DYNAMAX DOT 5.1 hazardous?
Its safety data sheet says the mixture is not classified as dangerous under CLP. Still keep it away from children and eyes, and rinse spills off paintwork straight away.

























Reviews
There are no reviews yet.